menu
Gtec Icon

Insights

Why are DFx, DFM, and DFT crucial beyond DRC in PCB Layout Design?

For those familiar with PCB design, DRC in PCB Layout Design is a vital first step in ensuring that PCB layouts meet the dimensional tolerances and connectivity requirements of the board schematic.

While DRC in PCB Layout Design is essential for checking that designs meet basic guidelines like trace width, component spacing, and via diameters, it only confirms that a design follows the rules. However, rule compliance alone isn’t enough for today’s high-volume, high-complexity designs where successful outcomes rely on overcoming real-world manufacturing challenges and testing complexities throughout the production process.

That’s where DFx, DFM and DFT come into play, helping to reduce risks, streamline production and accelerating time-to-market.

At Gemini Tec, we proactively integrate these advanced considerations into your PCB layout design. By collaborating closely with clients early on in the process we are able to leverage nearly 50 years of PCB layout expertise, incorporating best practices from the outset. This ensures a seamless transition from layout to production with PCB designs which fully address both manufacturing and testing realities, reducing risks and accelerating time-to-market.

Why do DFx, DFM and DFT matter?

  • DFx (Design for Excellence) is a comprehensive approach that optimises the entire design process, ensuring the product is not only manufacturable but also cost-efficient, reliable, and high performing across its lifecycle.

  • DFM (Design for Manufacturing) focuses on the ease and cost-effectiveness of production, ensuring your PCB can be efficiently built at scale.

  • DFT (Design for Test) ensures easy, effective testing during production, preventing defects and reducing time and troubleshooting costs.

By utilising our in-house PCB layout services, we can embed all of these critical considerations – DRC, DFx, DFM, and DFT – into your design from the outset. Through the extensive expertise of our in-house engineers, we then build in the necessary provisions for manufacturability and testability during the early design phase – helping you avoid costly revisions and ensuring smoother production.

Let's briefly look at what DRC, DFx, DFM and DFT mean for your PCB Layout Design:

Design Rule Checking (DRC)

DRC in PCB Layout Design is the foundation of a good design, validating that your PCB layout adheres to the necessary specifications and standards. It helps catch potential problems early, avoiding costly mistakes later in production but it doesn’t address the full spectrum of challenges you might face during for real-world manufacturing or testing.

Some common DRC checks include:

  • Minimum Clearance: Ensures proper spacing to prevent shorts.
  • Trace Width: Confirms that traces can handle required current loads.
  • Component Placement: Assesses spacing for heat dissipation and signal integrity.
  • Via Sizes and Spacing: Confirms that vias are appropriately sized and spaced for durability.
  • Solder Mask Clearance: Checks for adequate clearance to prevent solder bridging.

While DRC is important, it’s really just the beginning. To ensure your PCB is ready for real-world manufacturing and minimises risks like production delays or increased costs, integrating DFx, DFM and DFT considerations into the design process is essential.

Design for Excellence (DFx) Checks

DFx is a broad, proactive approach that looks beyond manufacturing and testing to ensure your PCB design is reliable, sustainable, and optimised across its entire lifecycle. 

At Gemini Tec, the combination of our extensive experience in PCB layout design and our end-to-end CEM capabilities uniquely ensure that we inherently adhere to DFx standards. By involving our engineers early in the design process, we can help prevent potential issues but also increase cost-efficiency, reliability and ensure scalability during production.

Design for Manufacturability (DFM) Checks

DFM focuses on how efficiently and cost-effectively a PCB can be produced. Our PCB layout services incorporate DFM principles from the start, building in manufacturability considerations to prevent issues that could lead to delays, extra costs, or unforeseen design complications. 

Gemini DFM Diagram
  • Optimised tolerances for manufacturing constraints.
  • Early identification of potential issues, reducing costs and delays.
  • Simplified designs for automated assembly, ensuring efficient production.

Design for Test (DFT) Checks

DRC in PCB Layout Design

DFT is vital for detecting defects during manufacturing and ensuring long-term reliability. While DFT may seem like a later-stage concern, integrating testability considerations during layout design is vital for long-term reliability and faster time-to-market. By building in testability from the start, we reduce the need for costly fixes later in production.

Our PCB layout expertise means we already incorporate DFT best practices early in the design process, helping you streamline testing procedures and prevent delays during production. This proactive approach ensures that your designs are optimised not just for compliance, but for smooth and reliable testing.

Achieve Seamless Transition from PCB Design to Full-Scale Manufacturing

At Gemini Tec, we go beyond just DRC in PCB layout design, our in-house processes are built on nearly 50 years of experience, supported by industry-leading tools such as Altium, CADENCE, and PADS. Our expert team collaborates with you to ensure all design requirements are fully understood and implemented, from layout to data preparation and production readiness.

This technical foundation allows us to eliminate barriers and optimise processes for seamless production, from prototype to mass production and ensures that your design moves smoothly from layout to full-scale production.

With EMS capabilities spanning locations in Aldershot, Melksham, and Bedford, we deliver extensive real-world knowledge for best practice, together with class-leading manufacturing capability to ensure the lifecycle of your products from design to prototype and production is fully assured.

What’s more, our layout services are not isolated, you receive an end-to-end service with your design prepared for efficient production from day one ensuring it transitions smoothly through every stage of production, from NPI to volume manufacturing. This comprehensive approach reduces risks, increases efficiency, and ensures that your design is optimised not just for manufacturing, but for long-term performance and scalability.

Key layout advantages include:

  • Optimised PCB designs for manufacturability and testing
  • High-density DDR3 layouts for complex designs.
  • Mechanical 3D modelling for precise component placement.
  • Signal integrity verification to minimise noise, crosstalk, and signal degradation.

Meticulous attention to your project is guaranteed: Our team of fully qualified IPC engineers operate advanced tools like 3D AOI and state-of-the-art X-Ray systems to ensure product compliance and conformance.

“The level of detail and advice given to us during the initial PCB layout phase of our project went far beyond our expectations, ultimately leading to another successful, time-critical project for us. Many thanks to all the experts at Gemini Tec”

Motorsport Sector

Maximise Your PCB Design with Gemini Tec – TechPoint Group

It’s not just about following rules – at Gemini Tec we go beyond DRC in PCB Layout Design to optimise every aspect of the design to maximise value, reduce risk, and get to market faster.

More Articles

Adam Why Solder Jet Printing-min

Why Solder Jet Printing?

Adam Harsant, MD, explains why in 2007, Gemini Tec took the pioneering step in the UK CEM industry by being the first to adopt solder jet printing.

Intelligent Material Costing

Adam Harsant (Managing Director) discusses the advanced BOM costing tool being used at Gemini Tec. We can connect directly to our suppliers and view live data, such as the stock level and the unit cost for any electronic component. This removes the risk within the supply chain process, long before committing to the PCB layout and PCBA assembly process.

pcb assembly

Electronics Sourcing 2023 Annual Edition

Adam Harsant (Managing Director) reflected on the recent success and achievements that have been made at Gemini Tec, as featured in the 2023 annual edition of Electronics Sourcing magazine.

Proven technical expertise and industry-leading technology for your low-medium volume, high mix electronics production requirements.

Our complete end-to-end service provides customers with PCB design layout, through to finished product assembly and test.

If you are looking for a technically capable CEM partner for: Surface mount PCB assembly, contract PCB assembly or PCB related products, please contact Gemini Tec for more information on how we can help your organisation.

Let's start the conversation ...

Talk to us today about your next project, let us know if you have any queries or to arrange a visit to our industry-leading facility:

Or just complete the form below: